![background image](http://html.mh-extra.com/html/unitec/rtr1003/rtr1003_configuration-manual_844152007.webp)
U N I T E C R O U T E R
RTR1003
3
Unitec Linksys Router Configuration Guide
Router Configuration
You will need to configure your router with the appropriate IP address settings, but first you must
connect to the router configuration pages.
1.
Connect a laptop or PC directly to the first available router port using an Ethernet LAN
cable.
2.
Open the web browser on the computer.
3.
In the browser address bar, type the following address (You must include the http://):
http://192.168.2.1
4.
The Router Management Login screen will appear:
5.
Enter “admin” (Linksys ’s default administrative User Name) into the User Name field.
6.
The default password is initially “unitec83”. Click the OK button to login.
Basic Setup
When you login upon initial setup, the Basic Setup screen will appear. Refer to page 1 of this
document for the information that will be required for setting up the router.
1. Choose your language from the drop down menu by Language.
2. Select the Internet Connection type from the drop down menu by Internet Setup. Choose one
of the three most common connection types:
Automatic Configuration
–DHCP
– Most sites with high-speed Internet connections will
chose this option.
Figure 2. Static IP Setup
Static IP
– If your modem requires a static IP address to be assigned in the router
(according to your ISP), chose Static IP. Enter the Internet IP Address, Subnet Mask,
Default Gateway, and Primary and Secondary DNS. This information should be provided
by your Internet Service Provider (ISP).