background image

GvK Smasher GMP Manual

10/31/2023

3

Thank you for purchasing GvK Smasher GMP. We hope you enjoy the product.

This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly,

non-technical personnel

should under no circumstance attempt to service the machine

. Contact your distributor or

manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.

Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:

High Voltage and Shock Hazard:

High voltage can cause electric shock.
Turn off/unplug power before servicing.

High Temperature Hazard:

This part may cause scalding.
Do not touch. Surface may be hot.

No Touching Hazard:

This part may be hot or can cause electric shock.
Do not touch.

Summary of Contents for GODZILLA VS. KONG SMASHER

















Reviews: