Unique CU Series, Service Manual And Spare Parts List

Page: 74 / 108

- 68 -
10.3. Operating Instructions – ETN1000
On/Off
Press
ON/OFF
button to activate the thermostat;
ON
led will lit.
For
OFF
press
ON/OFF
again;
OFF
led will lit.
Set Temperature
Press (+) or (-) button. Temperature digit will flash. Set to the desired temperature using the
(+) or (-) buttons.
Mode
Press MODE button and adjust between:
COOL, HEAT, COOL/HEAT
(Automatic cool/heat
change over) or
FAN
(fan only).
Fan
Press fan button and choose between: Fan high, medium, low or Auto speed (all together)
Auto speed: the fan speed change according to the difference in the temperature between “Set
temperature” and “Actual ambient temperature”. The greater the difference between “set” and
“actual” - the faster the fan-speed
Auto fan
Press and hold fan button and choose: Fan or Auto fan.
(Auto fan - fan is active only when there is demand for cooling or heating).