Unipulse TM400, Operation Manual

Page: 35 / 61

28
6 Hold Function
28
H
o
ld
Fun
ction
Chapter
6
6-3.
Peak hold
Holds the maximum value (peak value) of torque in the positive direction.
- Operation of peak hold (start mode: key)
Holds the maximum value after the key down.
Press the key again to confirm.
Press the key again to release hold.
- Operation of peak hold (start mode: level)
The hold operation starts when the torque exceeds the start level from below the start level after
pressing the key. When the torque falls below the stop level, detection will be stopped and
the torque will be fixed. After the torque falls below the stop level, the torque will be compared
with the start level again.
Press the key again to stop hold operation.
Time
Torque
Indicated value
Hold fix section
Lights off
Detection/hold
key input
HOLD display
HOLD
Hold release
section section
Flashes Lights on Lights off
HOLD
HOLD
HOLD
Detection/hold
section
Time
Torque
Indicated value
HOLD display
Hold fix section
key input
HOLD
Start level
Stop level
Detection/hold
section
Lights off
Flashes Lights on Flashes Lights off
HOLD
HOLD