6
3
Setting Procedures
6
Setting Procedures
Chapter
3
3-1.
USB interface
This USB interface allows the TM200 to be used in the dedicated PC application, such as retrieving
the torque, rotation speed and power of UTM
Ⅱ
, writing setting values into the TM200 and so on.
Communication specifications
Communication standard
USB Ver.2.0 compliant, full speed (12Mbps)
Connector
mini-B TYPE
3-2.
PC preparation
Please make sure to install USB drive and PC application prior to connecting TM200 to the PC for
the first time.
PC operating environment
OS
Windows7
CPU
Core i3
2GHz or above
Display
800×600 pixel or above
Memory
2GB or above
USB port
One or more free ports
Hard disk
15GB free space or more
USB driver
Virtual COM Port (VCP) Drivers (developed by FTDI Limited)
USB driver installation
In order to connect the TM200 to the PC, USB driver must be installed.
Download and install the driver following the procedure below.
The contents of this manual may differ from the ones on the FTDI website when the website is
updated. Visit the following FTDI website for details.
Guide
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
Driver
http://www.ftdichip.com/Drivers/VCP.htm
3
Setting Procedures