Unipulse F805AT-BC, Operation Manual

Page: 52 / 202

5.CALIBRATION
37
5-6-8. Decimal place (weight)
Define the data representation format (decimal point place) for the measurement items
that are defined as variable digits. See "SETTING ITEMS LIST" , on page 177 for
Operation
further information.
5-6-9. Gravitational acceleration
When the load cell is used in a remote location from where it was calibrated, a factor is
required to compensate the difference in gravitational acceleration between the two
locations. This compensation is not required if the distance between these locations is
not large.
In the table below, search the region number (01-16) of the location where weight
calibration takes place, and enter the number into the instrument when you perform
weight calibration.
Next, search the region number where the instrument is actually used, and enter the
number into the instrument.
This guarantees that the regional difference of gravitational acceleration is
automatically compensated.
Operation
Selectable format: 0, 0.0, 0.00, 0.000
MODE WEI.CALIBRATION → → DECIMAL PLACE(WEIGHT) PAGE →
01 9.806 02 9.805 03 9.804 04 9.803
05 9.802 06 9.801 07 9.800 08 9.799
09 9.798 10 9.797 11 9.796 12 9.795
13 9.794 14 9.793 15 9.792 16 9.791
Allowable range: 01 – 16 (2 digits)
MODE WEI.CALIBRATION
→ →
GRAV.ACCELERATION PAGE
→