1.OUTLINE
2
■
Touch panel display
This is the touch panel display for displaying an indicated value and graph set value and for setting
various setting items of the F600AT. During measurement, a comparison display, hold display and
graph display can be selected according to the function in use.
■
Status indicator lamp
■
Prohibition of key operation
Setting of all the key operations or individual key operation ON/OFF is done by "SYSTEM". Please
refer to "9. SYSTEM" on page 34 for details.
1-3-2. Rear Panel
Weight display
Graph display
Lamp indication
Status
Green lighting
Steady state
Orange lighting
Writing into internal NOVRAM. Do not turn off the power of the F600AT.
Yellow blink
Voltage drop of the internal memory backup battery.
Battery replacement is needed.
AC power source
RS-232C connector
Signal input/output
Analog input/output
connector
Frame ground
Optional slot
Protective ground
connector
input terminal block
*DC spec.
Red (plus)
Black (minus)
DC power source
Notice
- Be aware that the voltage drops depending on the wire thickness and length.
- Never input an AC power source. Doing so will cause a failure.
(Designated when it is shipped)
input terminal block
