Unipulse F377A, Operation Manual

Page: 89 / 152

8 SUPPLEMENTS
88
SU
PPLE
M
ENTS
Chapter
8
⑥
COM check
The data displayed under "Transmit data" is sent by pressing the
button.
Under "Receive data", externally transmitted data is displayed.
How to set
Please transmit something information sentence from connected equipment side to the check on the
reception. The data received to "Receive data" is displayed. Please confirm the cable or the setting
of communication condition when it is not correctly displayed, when "Parity" or "Frame" lights in
red.
Please press button to the check on the transmission. The data displayed in "Transmit
data" is transmitted. It will be confirmed to receive it correctly on connected equipment side. Please
confirm the cable or the setting of communication condition when it is not possible to confirm it.
■
Password
This setting is for maintenance and inspection. Do not operate.
8-4.
Unit Setting List
* The numbers correspond to the values in the input range of RS-232C.Differs from the turn of
a setting item.Also, "0" means no unit.
Mass Force Pressure Others
1 μg 12 μN 25 μPa 44 g/cm
3
63 kg/s
2 mg 13 mN 26 mPa 45 kg/m
3
64 t/h
3 g 14 N 27 Pa 46 t/m
3
65 m
3
/s
4 kg 15 kN 28 hPa 47 g/l 66 m
3
/min
5 Mg 16 MN 29 kPa 48 g/ml 67 m
3
/h
6 t 17 μNm 30 MPa 49 mg/m 68 l/h
7 lb 18 mNm 31 GPa 50 kg/m 69 l/min
8 dyne 19 Nm 32 N/m
2
51 kgm/s 70 l/s
9 kdyne 20 kNm 33 μbar 52 kgm
2
/s 71 ％
10 oz 21 MNm 34 mbar 53 kgm
2
72 km
11 TONNE 82 Ncm 35 bar 54 mPas 73 m
83 kgcm 36 mmHg 55 Pas 74 cm
42 kgm 37 inH
2
O 56 m/s 75 mm
43 gcm 38 ftH
2
O 57 km/h 76 μm
22 ftlb 39 psia 58 m/s
2
77 rpm
23 inlb 40 psig 59 t/s 78 mV
24 inoz 41 atom 60 kg/min 79 V
61 t/min 80 mA
62 kg/h 81 A
SET. COM Check
→
Self Check
→