16.CONFORMITY TO EC DIRECTIVES
92
16. CONFORMITY TO EC DIRECTIVES
The F340A digital indicator conforms to EC directives (based on the EC council of
ministers), carrying a CE mark.
- Low voltage directive:
EN61010-1
- EMC directive:
EN61326-1
When installing, attention should be given to the following.
1. Since the F340A is defined as an open type (built-in equipment), be sure to install the
F340A and fix to a panel or the like for use.
2. The power cable attached to this product as standard equipment can be used in the
AC100V power supply in Japan. (Official ratings voltage AC125V)
Please use the power cable authorized in the country when you use this product
outside Japan.
3. Use shielded cables for others (load cell, external I/O, option).
Attachment of a ferrite core
It is necessary to twist a power supply cable and sensor cables, such as a load cell,
around an attached ferrite core.
（
Common to AC spec. and DC spec.
）
EN55011
，
EN61000-4-2
，
EN61000-4-3
，
EN61000-4-4
EN61000-4-5
，
EN61000-4-6
，
EN61000-4-8
EN61000-4-11
，
EN61000-3-2
，
EN61000-3-3
Load cell
A cable is twisted around
a ferrite core.
（
One roll
）
F340A
Ferrite core
power supply cable
Summary of Contents for F340A
Page 1: ...F340A DIGITAL INDICATOR 14 Feb 2012 Rev 1 38 OPERATION MANUAL...
Page 9: ...CONTENTS 15 7 General Specifications 90 15 8 Accessories 91 16 CONFORMITY TO EC DIRECTIVES 92...
Page 92: ...13 SELF CHECK FUNCTION AND INITIALIZATION 83 Self check Visual Check Sequence...
Page 94: ...13 SELF CHECK FUNCTION AND INITIALIZATION 85 Initialization Sequence...
