Unipulse F331, Operation Manual

Page: 69 / 88

60
7 OPTION
60
OP
TION
Chapter
7
■
Command communication formats
- Read the linked with indicated value (sign, 5-digit, decimal point)
- Read the not linked with indicated value (sign, 5-digit, decimal point)
- Status 1
For transmission formats, see " ■ Continuous transmission formats" on page 65.
Attention
About the timing for continuous transmission
According to the communication baud rate setting, the continuous
transmission intervals in the case where any of the communication modes
from 1 and 2 is selected are as follows:
Communication baud rate Continuous transmission interval
38400 bps 100
times/sec.
19200 bps 50
times/sec.
9600 bps 25
times/sec.
4800 bps 12
times/sec.
2400 bps 6
times/sec.
1200 bps 3
times/sec.
Point
Host
F331
R A
＋
0 1 0 0 0
.
R CR A
0 fixed
Delimiter
Host
F331
R B
＋
0 1 0 0 0 .
R CR B
0 fixed
Delimiter
Host
F331
R C 0 0 0 0 0 0
R CR C
Delimiter 0
+LOAD
-LOAD
OFL2
OFL1
HH
LL
Calibration error No.
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
0: OFF 1: ON
F331 error No.