109
13
Options
109
Options
Chapter
13
■
Setting values related to BCD data input
■
BCD data update rate
■
BCD data update rate setting method
1.
Select setting mode 4.
→
(three times)
2.
Select "BCD data update rate".
Press the
key four times.
Set the BCD data update rate using the
keys, and confirm it
with the
key.
* Settable HI limit is up to the value set
for a sample rate.
3.
Press the
key to return to
the indicated value display.
■
BCD output mode
■
BCD output mode setting method
1.
Select setting mode 6.
→
(five times)
2.
Set "BCD output mode".
Press the
key four times.
Set the BCD output mode using
the
keys, and confirm it with
the
key.
3.
Press the
key to return to the indicated value display.
Not linked with indicated value
Output is scaled and linked with sensor input.
Output corresponds to changes in sensor input signals even if indicated values are held.
* When analog peak hold (peak hold selection = 1: analog, and hold mode = 1: peak hold) is
used, the 5 digits will be the same as the linked indicated values.
FNC
+
-
ZERO
6: 100 times/sec.
〃
7: 300 times/sec.
〃
8: 500 times/sec.
〃
9: 1000 times/sec.
〃
10: 3000 times/sec. STROBE range
BCD data update rate
5: 50 times/sec.
〃
4: 30 times/sec.
〃
3: 10 times/sec.
〃
2: 5 times/sec.
〃
1: 3 times/sec.
〃
0: 1 time/sec.
〃
5 msec
1.67 msec
1 msec
0.5 msec
0.167 msec
10 msec
16.7 msec
50 msec
100 msec
167 msec
500 msec
CAL
HOLD
GAIN
CAL
HOLD
FNC
+
-
Normally, data is updated linking with the number of A/D convert times
(3000 times/sec.). Slow the data update rate if the data cannot be read at 3000
times/sec due to low processing capability of equipment receiving BCD.
Key points
FNC
+
-
ZERO
BCD output mode
1: Not linked with indicated value
0: Linked with indicated value
CAL
HOLD
GAIN
CAL
HOLD
FNC
+
-