23
5
FUNCTIONS
23
FUNCTIONS
Chapter
5
5-1.
Weight Display
■
Gross Weight and Net Weight • Tare Weight
The F160 allows weighing by switching the weight between gross weight and net weight.
The relationship between the gross weight and net weight is as follows:
On the indicated value display screen, switch the display between gross weight, net weight, and tare
weight with the [
] button.
After any of [d0] to [d2] is displayed for a while, a weight value is displayed.
Also, by pressing the [
] button, any of [d0] to [d2] is displayed for a while to indicate the current
weight value.
After execution of calibration operation, gross weight display is forced.
5-2.
Tare Subtraction
Tare subtraction (Setting code 80)
This function zeros the net weight. This operation does not change the gross weight.
Input TARE ON, or set the tare subtraction command.
Setting/
0: Cancel
1: Execution
Tare reset (Setting code 81)
This function resets tare subtraction. This operation resets the net weight and gross weight to the
same value.
Input TARE OFF, or set the tare reset command.
Setting/
0: Cancel
1: Execution
5
FUNCTIONS
Gross weight = Net weight + Tare weight
Gross weight is material to be
weighed (Net) plus a container (Tare).
▽
△
[ ]
△
[ ]
△
[ ]
Gross weight
Net weight
Tare weight
