![background image](http://html2.mh-extra.com/html/unipulse/f156/f156_operation-manual_3889947103.webp)
6.FUNCTIONS
94
Weight value confirmation at the sequence mode
Confirm whether the weighing value has reached SP1 at the start of weighing.
(select from ON or OFF) If it has, “Sequence error 5” will be displayed.
Refer to "6-12-4.Final / Set point2 / Set point1 / Compensation / Over / Under" on p.75
concerning Set Point 1 setting.
Setting /
1 : Valid
0 : Invalid
CC-Link
0
53
MSB
LSB
RWw0006
RWw0005
RWw0004
Write the code No. and set value.
H
L
0
0 to 1
Word size
remote register
Set value
Code No.
Console
1) Select code 53.
2) Press the ENT key, and then set the
weight value confirmation.
3) Determine the setting with the ENT key.
Weight value
confirmation
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...