Unipulse DS252, Operation Manual

Page: 60 / 124

3 Basic operation of the DS252
49
30 : Option Table Ch
Select the operation of setting codes by option.
31 : Maximum Recorded Count Setting
Set the count to perform GT operation.
32 : Grand Total Timer
Set the grand total timer.
Setting name
30 : Option Table Ch (OPTION TABLE)
Selectable items
00 : ChA (initial value)
01 : ChA+ChB
Display
Reference 01 : About the setting of "01: ChA+ChB"
If this setting is selected with "22 : Code Selection" (page 45) set to OPTION
TABLE, a code name can be set on both Ach and Bch by using the option-input
code table number.
The code name corresponding to the input code table number is called out of
respective code tables and set on Ach and Bch at the same time.
Precautions No code name can be called out of the code tables on Bch alone.
Setting name
31 : Maximum Recorded Count Setting (MAX COUNT)
Setting range 1 to 9999 (The initial value is 9999.)
Display
Reference GT operation is performed when any of the codes in use reaches the maximum
recorded count set here.
Setting name 32 : Grand Total Timer (GT TIMER)
Selectable items 00 : OFF (initial value)
01 : ON
12 : 00
Display
Reference ・
By this function, GT operation is performed and a file is created at the preset time
every day.
・
The GT operation time can be input by selecting ON and using the key.
Input the time and set the function with the key.
(The initial setting is 12:00.)
・
GT operation by other factors remains valid.
3 0 : O P T I O N T A B L E
0 0 : C h A
3 1 : M A X C O U N T
9 9 9 9
3 2 : G T T I M E R
0 0 : O F F