Unipro 03-05-001, User Manual

Page: 43 / 56

43
at steps of 0.1 second in this example.
Use the up ( ) and down ( ) buttons to
change the lap highlighted on the screen with
the small triangle below it.
Use the mode button ( ) to change back to
the first analyze screen.
MIN/MAX ANALYSIS
To analyze important minimum and
maximum values, use this screen.
List of laps with min and max values
shown.
The session’s best lap time is shown at the top
of the screen, and the best lap is highlighted
with a bold lap number and lap time.
Use the up ( ) and down ( ) buttons to
change the laps visible on the screen. The
up
( ) button will increase the lap number, e.g.
scroll the screen up.
Use the mode button ( ) to change between
minimum and maximum values.
COUNTERS AND TIMERS
The counters and timers do include infor-
mation about the tire wear counters, engine
timers, and the lap length.
TIRE WEAR COUNTERS
All the tire wear counters are shown on one
single screen. This is an overview of all the
counters’s value and the current selected tire
wear counter.
Please notice that this is for analyze only. The
tire wear counters cannot be changed from
here. To change the counters, please see ”TIRE
WEAR MENU” on page 24.
A list of all tire wear counter values.
Use the mode button ( ) to change to the
next analyze screen.
ENGINE TIMERS
All the engine timers are shown on one single
screen. This is an overview of all the timers’s
value and the current selected engine timer.
Please notice that this is for analyze only. The
engine timers cannot be changed from here.
To change the timers, please see ”ENGINE
TIMERS MENU” on page 26.
A list of all engine timer values.
Use the mode button ( ) to change to the
next analyze screen.
LAP LENGTH
When a speed sensor is attached to UniGo,
this sensor is used to measure the length of
each lap.
Operating UniGo
R e f e r e n c e
G u i d e