Unipro 03-05-001, User Manual

Page: 38 / 56

38
Each LED is totally programmable and flexible.
Please see how to do it under ”WARNING LED
SETUP” on page 28.
The LEDs can either be constant on, blink
slowly or blink fast. If the RPM shift light is
used, it will use the fast blink, and the warning
LEDs should use constant or slow to avoid any
confusions. The warning LEDs do have the
lowest priority and if shift lights are used, the
warnings are not active until gear is shifted.
Warning LEDs 1 and 5 are active.
showing which buttons to press to use the
different functions.
WARNING. Do not look directly into the
LEDs when they are set to high bright-
ness. They are very bright!
SHIFT LIGHT
Unigo can use the five LEDs as gear shift light.
Even if warning lights are active, the shift light
have priority and will take control of the LEDs.
First LED turned on in the shift light.
If RPM Shift Type is set to “single LED” (see
”RPM SHIFT TYPE” on page 27) each LED
will turn on individually. Two different settings
are needed. The first is the optimal engine
revolution at which gear should be shifted.
This will be indicated with the yellow LED. The
second is the distance between the LEDs. If
you set the RPM shift point at 12000 RPM,
and the RPM delta value to 200 RPM, the first
LED will turn on at 11600 RPM. Then 11800
RPM, 12000 RPM etc.
Please see ”RPM SHIFT” on page 26
and ”RPM DELTA” on page 27 for more
information.
Yellow LED means optimal gear shift point.
Shift light when all LEDs are flashing.
If ”RPM SHIFT TYPE” on page 27 is set to
“All LEDs“, all five LEDs will flash rapidly when
the RPM shift point is exceeded. The RPM
delta value will not be used.
WARNING. Do not look directly into the
LEDs when they are set to high bright-
ness. They are very bright!
BETTER / WORSE LIGHT
Unigo have two extra LEDs for better / worse
time indication. If this is enabled, then a new
lap or split time will be compared to the best
time, and then either a green LED (better) or
red LED (worse) will light up for x seconds. This
is a very fast indication if you are doing better
for the segment or lap.
Worse LED turned on to show the laptimer
is worse than the best lap time.
LOW BATTERY
When the battery voltage get too low, a
warning icon will be show in the headline and
in the help text. The icon in the headline is
showing how close to empty the battery is. To
see more about the warning levels, please look
Operating UniGo
R e f e r e n c e
G u i d e