UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
24
Revision 2.05
Of 107
11.3. Using the keypad
For Test Condition 1 active button is supported. Where the fire control panel operates in
combination of other conditions, their buttons are active too.
Press the Menu button
to enter Information and Control Mode.
12. Information and Control Mode
12.1. Description
Information and Control Mode provides the user with the possibilities to display information
associated with the fire control panel, and to enter control data.
To enter Information and Control Mode, press button
on the screen for Duty Mode, Fire
Condition, Fault Condition (with the exception of the screen for fatal error), Test Mode or Disabled
component.
No specific LEDs or sound indication is provided for Information and Control Mode.
Where the fire control panel operates in combination of Information and Control Mode and Fault
Condition, button
(Stop Alarm) is active too. Where the fire control panel operates in
combination of Information and Control Mode and Fire Condition, buttons
(Stop Alarm),
(Outputs) and
(Inspection) are active; and at Access Level 2 is active button
(Reset
Fire).
The screens visualized on the display are organized in a tree structure, containing subordinate
menus (Appendix 2
а
). Transition to a lower hierarchy menu is performed by the means of button
(Enter); to revert to an upper hierarchy menu use button
(Cancel). To switch between
elements of one menu use buttons
(Up) and
(Down), when the menu is displayed as an
ascending window from the bottom left corner of the screen, or use buttons
(Move Up) and
(Move Down), when the menu is displayed as a panel in the middle of the screen. To exit the
condition press button
(Exit) or button
(Cancel) until you exit the main menu.
When you enter Information and Control Mode, transition to the first menu is being carried out.
The first menu contains three subordinate menus, requiring separate access levels:
−
Lists – Access Level 1;
−
System functions – Access Level 2;
−
SetUp – Access Level 3.
12.2. Menu
Lists
The menu displays detailed information associated to the current state of the fire control panel
and the addressable devices, as well as for the configuration and the setup of the control panel.
Menu
Lists
contains the following subordinate menus and information screens;
−
Menu
Faults;
−
Menu
Disables
;
−
Menu
Tests;
−
Screen
Panel configuration;
−
Menu
Panel parameters
;
−
Menu
Loops
;
−
Menu
Zones
;
−
Menu
Devices status
;
−
Menu
Inputs
;
−
Menu
Archive
.
