ATMOS Operation Manual
page 16/24
Settings Screen
The
Settings
screen can be reached by touching the
gear symbol
on the lower right corner of the main screen.
Date
To change the date, click on the button “Date”. You will be asked to type in the date in the following order:
1.
Year
2.
Month
3.
Day
Please note: Each value has to be entered with
2 digits
(YY MM DD). There is no need to confirm the values. Typing
the second digit will automatically confirm your input.
Time
To change the time, click on the button “Time”. You will be asked to type in the time in the following order:
1.
Hour
2.
Minute
Please note: ATMOS runs on 24h. Each value has to be entered with
2 digits
(hh mm). There is no need to confirm
the values. Typing the second digit will automatically confirm your input.
Info
Clicking on the button “Info” will give you information on your instrument.
Firmware
Serial Number
VRef & VInt
Calibration values (pre-defined by UniPix)
Click to change time
Click to change date
Pressure test
Information on the
instrument
Go back to main
screen
