UnionNet SP2100 User Manual Download Page 31

Page: 31 / 80

APPENDIX B

SP2100 2D Imager Setup Barccodes, con’t

BarcodeGuy.com® - UnionNet SP2100 User’s Guide

nly

Programming “ON”

Programming “OFF”

Figure B.0

Instructions:

To change the option, first scan the

Programming “ON”

barcode.

Then scan the Option Code. Finally scan the

Programming “OFF”

barcode.

B.10 - ITF-6

B.9 - ITF-14

Scan the

Save Programming

barcode, then scan the

Programming “OFF”

barcode.

Disable ITF-14

Enable ITF-14 Do Not

Transmit Check Digit

Enable ITF-14 Transmit

Check Digit

ITF-14 is a 14 character long Interleaved 2 of 5 barcode with a check digit.

Disable ITF-6

Enable ITF-6 Do Not

Transmit Check Digit

Enable ITF-6 Transmit

Check Digit

B.11 - Code 39

Set Code 39

Factory Defaults

Enable

Code 39

Disable

Code 39

ITF-6 is a 6 character long Interleaved 2 of 5 barcode with a check digit.

Transmit Code 39

Start / Stop Digits

Don’t Transmit Code 39

Start / Stop Digits

Because Code 39 is commonly generated without a check digit, it has asterick (*) start and stop characters surrounding the encoded string:

Min and Max String Lengths

- To limit the length of the barcode string as a form of validation, you can set a minimum and maximum

string length. These lengths include check and stop/start digits if applicabl to the symbology. To set the string length:

Scan the

Programming “ON”

barcode.

Scan the

Set Min Length

barcode, then scan the digit code(s) from

Section B.29

of this Appendix (B) for the number representing

the minimum length.

Scan the

Save Programming

barcode.

Scan the

Set Max Length

barcode, then scan the digit code(s) from

Section B.29

of this Appendix (B) for the number representing

the minimum length.

Set Code 39

Min Code Length

(Default = 1)

Set Code 39

Max Code Length

(Default = 42)

NOTES:

* String length must be less than 127 bytes.

                 * MAX LENGTH must be less than or equal to MIN LENGTH.
                 * If MIN LENGTH = MAXLENGTH, only that single length barcode
                    string will be allowed.

Summary of Contents for SP2100
















































































Search results

Summary of Contents for SP2100

Reviews:

UnionNet SP2100, User Manual, Page: 31 / 80

Search results

Summary of Contents for SP2100

Reviews: