Union INCA1011, Original Operating Instructions

Page: 45 / 65

45
9 Decommissioning/switching off
ATTENTION
To decommission the process gas analyser and the linked system components
according to their operating instructions.
NOTE
The following table contains the steps for decommissioning the analyser for a
long period.
If you only wish to switch off the process gas analyser temporarily, a few steps
can be omitted:

Column Switch off!
Steps Turn off
Decommi
ssioning
Disconnect the device from the process, close the line professionally.
X X
Rinse the process gas analyser with ambient air. (Start calibration with
purge gas)
X
Shut down the linked system components.
X X
Turn of the master switch.
X X
If you only wish to switch off the process gas analyser temporarily, follow the
procedure here to the end!
If required, disconnect / switch off the operator's energy and media supply and the
signal transmission professionally.
X
If advantageous, pack process gas analyser.
X