Union INCA1011, Original Operating Instructions

Page: 13 / 65

Safety notes
13
2.4 Safety notes
2.4.1 General notes on safety
WARNING
The process gas analyser may only be operated when all of the protective
equipment is available and operable.
Additional safety notes:

before the corresponding chapters!
2.4.2 Indications of special hazards
WARNING
•
After installation, all gas conducting parts must be checked for leaks
according to national regulations.
•
All repairs that require the protective covering to be opened may only be
performed by trained personnel.
•
Sensors can contain sulphuric acid. This may leak in case of improper use.
Protect from contact with skin and eyes.
2.5 Regular operator training
NOTE
Country-specific regulations about regular user training by the operator must be
observed, in particular training on handling gases and electrical equipment.