Fundamental Safety Instructions
User Manual CWD2005 Plus
2. Fundamental Safety Instructions
Before operating or maintaining the instrument it is of utmost importance to get familiar with
all operating and maintenance instructions contained in this manual. The manuals contain
important information on how to operate the system safely and properly.
The instructions have to be carefully observed in order to avoid danger, to prevent accidents
and to increase the reliability of the system.
This Operating and Instruction Manual is to be supplemented by the respective national HSE
(Health – Safety – Environment) rules and regulations.
It is strongly recommended to make a complete set of the Operating and Maintenance
Instructions permanently available in the instrument container.
Any person in charge of carrying out any kind of operation or work with and on the instrument
system such as:
- Operation, including setting-up,
- Calibration,
- Maintenance (servicing, inspection, repair),
- Fault tracing,
- System restoration,
- Transport,
- Erection,
- Cleaning
shall have read the instruction manuals.
In addition to product information and to the rules and regulations for accident prevention and
to the environmental protection mandatory for such kind of installations in the country and
place of use the generally recognized technical rules for safe and proper working must be
strictly observed.
The instrument system as a whole as well as all individual equipment and apparatus has
been manufactured and assembled in accordance with the state of the art standards and the
relevant safety rules. Nevertheless, its use may constitute some risk to life and limb of users
especially because the system is handling flammable toxic gases.
The instrument system shall only be used in technically perfect conditions in accordance with
its designated use and the instructions set out in this Operating and Maintenance
Instructions. Only safety-conscious, qualified, skilled and instructed personnel shall be
involved in operation and maintenance of the system.
Any damage and/or abnormal observations must be directly reported to the operators.
Repair, assembly and maintenance shall be carried out only with the instrument switched
electrically off.
For damage resulting from inappropriate usage
7