Union Instruments INCA6003, Translation Of The Original Operating Instructions

Page: 31 / 69

Transport, setup and acceptance
31
Remote Control Unit RCM
Fig. 5.8: Remote Control Unit RCM X15
Pos.-
No.
Description
1 bus, connecting internal power supply
2 internal, RS232 connection for PCB-AddOn (Display) via null modem cable
3 connection Fieldbus coupler
4 bus, connecting internal power supply
5 DIP switches
6 Ethernet
7
status LED, LED 1- USB active, LED 2- Fieldbus active, LED 3 - Ethernet active
(from top to bottom)
8 Micro-USB, local connection to PC, if used no connection via Ethernet/Fieldbus
Communication module for integration into Ethernet networks to communicate and
operate the process gas analyser
.
DHCP is enabled as factory setting, RCM received IP - address automatically from
a DHCP server. Manual assignment of IP address with separate software
(example: "DeviceInstaller", Lantronix).
Default Settings:
IP over DHCP
On
Port 10001
Protocol TCP/IP
RS232 115200 bit/s, 8 data bit, 1 stop bit, no parity bit
MAC address refer to label on RCM.
2
1
3
4
5
6
7
8