Union Instruments INCA6001, Translation Of The Original Operating Instructions, Page: 18 / 67

Connections
18
Fig. 4.2: Connections
1. Output process gas 7. Input process gas 3
2. Input calibration gas 1 8. Input process gas 4
3. Input process gas 1 9. Input calibration gas 1
4. Input process gas 2 10. Output condensate
5. Lead-throughs for power supply 11. Output pressure regulator leakage
6. Input ambient air 12. Input compressed air
The compressed air must be dry and free of dust; otherwise, the valves can be
destroyed.
Control pressure: 6 - 8 bar (87 - 115 psi). Every 15 minutes, 50l of compressed air
is required for 60 seconds.
4.1 Accessories
WARNING
Risk of injury/defective!
Use of non-approved accessories can cause defects and be hazardous. This will
render the warranty null and void. The operator is then liable for any damage that
may occur.
Only use original accessories or accessories that have been approved by Union
Instruments GmbH.
5
1
6
7
8
12
10
9
11
2 3
4