Union Instruments INCA5021, Translation Of The Original Operating Instructions

Page: 27 / 67

Transport, setup and acceptance
27
Analogue outputs
Fig.
5
.
6
: Terminal block X11: Analogue outputs (Number optional)
Item
No.
Function
Item
No.
Function
10 Output 1 – signal/signal 4-20 mA 14 Output 5 – signal/signal 4-20 mA
30 1 GND 34 5 GND
11 Output 2 – signal/signal 4-20 mA 15 Output 6 – signal/signal 4-20 mA
31
2 GND
35
6 GND
12 Output 3 – signal/signal 4-20 mA 16 Output 7 – signal/signal 4-20 mA
32 3 GND 36 7 GND
13
Output 4 – signal/signal 4-20 mA
17
Output 8 – signal/signal 4-20 mA
33 4 GND 37 8 GND
With optional equipment with analogue outputs, assignment is as follows:
Assignment of analog interface configurable with Software INCACtrl.
The load resistor is 500 ohm.