UNION Instruments GmbH
INCA Analyzer Series
– Instruction Manual
General description
Page 17 of 59
3.3.2
Saving the configuration to the INCA Analyzer
Note
Any change of INCACtrl configuration will only become effective after saving
them to the INCA Analyzer.
1. Check the following sign in the INCACtrl. Red cross shows that some changes are
made in the INCACtrl configuration
Figure 3-9: Configuration changed
2. Click on this button
to save the INCACtrl configuration to the INCA Analyzer.
Figure 3-10: Saving the configuration
