UNION Instruments GmbH
INCA Analyzer Series
– Instruction Manual
Page 20 of 59
System main menu
In the figure above the measuring phase is active and the analyzer will switch to next phase
in 4 minutes 57 seconds. Channel 1 of 3 available channels is active and currently
measured.
For a continuous measurement setup the display indicates the continuous measurement with
a blinking asterisk (“
*
”) symbol.
Figure 4-2: Display for continuous measurement configuration
Note
All the keys are active as soon as the display is set to its high brightness.
Pressing any key makes the display illuminate, which means that keys are
active.
MEASURING
*
Channel :
1/1
01/05/2010
11:41:01
