manualshive.com logo in svg

Union Community Virdi AC-2100, User Manual

Share
Download
Union Community Virdi AC-2100 User Manual Download Page 37

AC-2100 User Guide                                                                     

37

 

fails and “Duplicated!” message is displayed. 

 

 Press [ENT] button to continue setting. 

 

<Print Out> 
1.Yes 

2.No                             

[ESC][

↑

][

↓

][ENT]

 

  Default setting: ‘2.No’ 

 

 

This menu is to set up if the authentication result is needed for printing.    If you 

set up ‘1’, the printer connected by RS232 prints out terminal ID, user ID, date 
and time and authentication mode.  The compatible printer is “SPR-350” Serial 

model. 

 

3.5.2. Authentication Method Setting 
 

If [3.Option] is selected at the main menu, the following screen is displayed. 

 

1. Application 

2. 

Verify Option

 

3. 

Set Doorlock

 

4. 

Sound Control 

5. LCD Setting 
6. Time Setting 

[ESC][

↑

][

↓

][ENT]

 

 Select 

[2.

Verify Option

] to set the default 

authentication method of the terminal. 

 

 

3.5.2.1. ID Display Option Setting upon Authentication Success 

 

◆

 At default screen [F3~] 

 [3.Option] 

 [2.

Verify Option

] 

◆

 

 

 

<Show User ID> 

0.None 

1.UserID 
2.UserName 

3.Message 

[ESC][

↑

][

↓

][ENT]

 

Default setting: ‘0’ 

 

UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu   
Seoul, Korea (138-050) 
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected] 
http://www.unioncomm.co.kr 

If the default setting ‘0’ is used, only the authentication result message is 
displayed upon authentication success. If it is set to ‘1’, the ID of an 

authenticated user is displayed on the LCD screen as shown below. If it is set 

to ‘2’, the user’s name is displayed on the LCD screen. However, if the user’s 
name is not available, the ID is displayed instead. If it is set to ‘3’, the user’s 

Summary of Contents for Virdi AC-2100





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands