AC-2100 User Guide
25
For the registration of a user, fingerprint registration (Refer to Registration with
“1. FP”) is done after card registration is completed (Refer to Registration with
“2.Card”).
3.3.2. User Deletion
◆
At default screen [F3~]
[1.User]
[2.Delete]
User ID [F4~]
◆
If “1.User” is selected by pressing [1] button in the main menu, the following
screen is displayed.
1. Add
2. Delete
3. Modify
4. Add Admin
5.
Delete All
[ESC] [
↑
] [
↓
][ENT]
Select [2.Delete] to delete a user.
This is an item that deletes a user registered in the terminal. After entering the
ID of a user to be deleted, press down [F4] button for a longer period of time.
Afterwards, the buzzer sound for success is heard and user information is
deleted from the terminal. Note that deleting information from the terminal does
not delete the information in the server. To completely delete information, you
must also delete the information in the server.
If the ID of an unregistered user is entered, the LCD message “Unregistered ID”
is displayed and the buzzer sound for failure is heard. Afterwards, the system
moves to the menu at the time of selecting “2. User Deletion”.
Be sure to note that general user and administrator are not distinguished when
deleted. Also, note that user information cannot be recovered in case of deleting
a user who is registered only in the terminal but not in the network server.
3.3.3. User Change
◆
At default screen [F3~]
[1.User]
[3.Modify]
User ID [F4~]
Select
information to modify
Modify user information
◆
Select “1.User” at the main menu.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]
http://www.unioncomm.co.kr
