Union Community UBio-X Pro2 User Manual Download Page 74

Page: 74 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr

3.9.1. System

If you select the

[Terminal info]



[System]

in the main menu, the following window

appears.

▶

System info

The hardware and firmware version of

terminal is shown.

▶

Disk (using size / Total size)

It shows the using size of the hard disk.

If the using size is high, it is represented in red.

▶

Ram (using size / Total size)

The using size of RAM among the all size

is represented.

If the using size is high, it is represented in red....

Click

[BACK]

button to finish the inquiry and move to the upper menu. Click the menu

on the left side to inquire additional item.

Summary of Contents for UBio-X Pro2

























































































Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands

Union Community UBio-X Pro2, User Manual

Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands