8
Document 52017 NION-MXL Instruction Manual Rev. A 10/10/02
1.4 Site Requirements
The NION-232B can be installed in the following environmental conditions:
Temperature range of 0ºC to 49ºC (32°F - 120°F).
93% humidity non-condensing at 30ºC (86°F).
1.5 Cabinet Installation
The NION-232B is designed to be installed on a wall within 20 feet of the control panel in the same room. The
type of hardware used is at the discretion of the installer, but must be in accordance with local code requirements
1.3 Required Components
The NION-MXL requires the following equipment:
NION-232B
SMX Transceiver (S7FTXC,FTXC, FOXC or DFXC)
Software kit for NION-MXL interface
Enclosure (NISCAB-1)
The following paragraphs describe all required and optional components used to assemble a functional NION-
MXL. All of the items described must be ordered separately.
NISCAB-1 Installation
The NION-232B may be mounted stand-alone in a single node enclosure, the NISCAB-1, where power is supplied
by the monitored equipment or an external source. This enclosure is provided with door and key lock.
Mounting the enclosure to its wall position
1) Use the provided key to unlock the enclosure cover.
2) Remove the enclosure cover.
3) Mount the enclosure to the wall. Refer to the enclosure mounting hole layout below.
Figure 1-2: NION Stand-Alone Enclosure Mounting Hole Layout
When mounting single NION boards in
this enclosure, be sure to use the
inboard set of four mounting studs.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com