Uninet 2000 NION-MXL, Instruction Manual

Page: 16 / 20

16
Document 52017 NION-MXL Instruction Manual Rev. A 10/10/02
3.5 Online Panel Session Commands
The following online panel session commands are available via the NION-MXL panel session. For a more compre-
hensive list and descriptions, consult your MXL documentation.
On-Line Session Command Table
Acknowledge Commands History Commands
Command Function Command Function
AAL Acknowledge Alarm HAL Alarm history from time/date
ASP Acknowledge Supervisory HSP Supervisory history from time/date
ATR Acknowledge Trouble HTR Trouble history from time/date
ASCAcknowledge Security HSC Security history from time/date
SUA Silence/Unsilence Audibles HAE All events from time/date
List Commands Control Commands
Command Function Command Function
LST List Status CRS Reset MXL panel
LAL List Alarms LON Log On
LSP List Supervisory LOG Log Off
LTR List Trouble LMP Lamp Test of MKB-1
LSC List Security LCD Test LCD display on MKB-1
LSS m List Sensitivity (m=module number) PWR m Power report (m - PSR-1 or MMB-1 module number)
LAV m List Analog Voltage (m=module number) MLT m MOI-1 Lamp test
LTV m List Threshold Voltage (m=module number) DEV m-d x Device LED Control
m = module number
d = sub-address device LED
x = E for energize LED,
D for de-energize LED
LMT m List Module Type (m=module number
LDT m List Device Type (m=device number)
LMS m List Messages (m=module number)
LSW List Software Version
Miscellaneous Commands
Command Function Command Function
CTD hh:mm:ss
nn-dd-yyyy
Reset time/date.
hh = 2-digit number of hours (24-hr format)
mm = 2-digit number of minutes
ss = 2-digit number of seconds
nn = 2-digit month of year
dd = 2-digit day of month
yyyy = 4-digits of year
CSS m-d x Change Sensitivity
m = module number
d = sub-address of smoke detector
x = desired sensitivity setting
0-low3; 1-low2; 2-low1; 3-Norm;
4-hi1; 5-hi2; 6-hi3
CIP m-d x Change (Arm/Disarm) Input Point
m = module number
d = sub-address of smoke detector
x = A for Arm, D for Disarm
COP m-d x Change (Arm/Disarm) Output Point
m = module number
d = sub-address of smoke detector
x = A for Arm, D for Disarm
Figure 3-5: Online Panel Session Commands
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com