Unimig KUMJRRW250MIG Operating Manual Download Page 2 | Manualshive

Page: 2 / 48

background image

Thank you for your purchase of your RAZOR MIG 250 Welding Machine.

We are proud of our range of plasma cutting and welding equipment that has a proven track record of innovation, performance and reliability.

Our product range represents the latest developments in Inverter technology put together by our professional team of highly skilled engineers. The
expertise gained from our long involvement with inverter technology has proven to be invaluable towards the evolution and future development of our
equipment range. This experience gives us the inside knowledge on what the arc characteristics, performance and interface between man and machine
should be.

Within our team are specialist welders that have a proven history of welding knowledge and expertise, giving vital input towards ensuring that our
machines deliver control and performance to the utmost professional level.

We employ an expert team of professional sales, marketing and technical personnel that provide us with market trends, market feedback and customer

comments and requirements. Secondly they provide a customer support service that is second to none, thus ensuring our customers have confidence
that they will be well satisfied both now and in the future.

UNIMIG welders and plasma cutters are manufactured to be compliant with - AS/NZ 60974-1, guaranteeing you electrical safety and performance.

WARRANTY

• 2 Years from date of purchase.

•

Welding Guns Of Australia PTY LTD Ltd warranties all goods as specified by the manufacturer of those goods.

• This Warranty does not cover freight or goods that have been interfered with.

• All goods in question must be repaired by an authorised repair agent as appointed by this company.

• Warranty does not cover abuse, misuse, accident, theft, general wear and tear.

• New product will not be supplied unless Welding Guns Of Australia PTY LTD has inspected product returned for warranty and agrees to replace product.

• Product will only be replaced if repair is not possible

• Please view full Warranty term and conditions supplied with machine or at

www.unimig.com.au/warranty-registration/

or at the back of this manual.

REGISTER YOUR MACHINE ONLINE TO RECEIVE AN

ADDITIONAL 6 MONTHS ON YOUR WARRANTY

Visit

unimig.com.au/warranty-registration/

to register your machine.

2

| RAZOR MIG 250 Manual

WARRANTY

«
1
2
3
4
...
»

Summary of Contents for KUMJRRW250MIG

















































Reviews:

No comments

Related manuals for KUMJRRW250MIG

Brand: Oklahoma Sound Pages: 4

Brand: V-Tec Pages: 24

Brand: Panasonic Pages: 89

Brand: M&K Sound Pages: 15

Brand: Displays2go Pages: 3

Brand: Aiwa Pages: 20

Brand: Uniden Pages: 66

Ghost Beat SY-1245

Brand: Sytech Pages: 5

Brand: CALECTRO Pages: 4

ABIPLAS CUT 200 W/MT

Brand: Abicor Binzel Pages: 100

HRU-WALL Series

Brand: Nalnor Pages: 28

InverArc 160 Plus

Brand: HTP Pages: 10

Brand: QMotion Pages: 16

Brand: SWF Pages: 15

Brand: Halo Smart Labs Pages: 34

Brand: YA Pages: 2

Brand: Lorex Pages: 14

HOME ARENA MX 5.1

Brand: TerraTec Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands