OPERATING MANUAL
This booklet contains important information concerning the proper and safe operation of your new equalizer
.
PROFESSIONAL SOUND EQUIPMENT
Graphic Equalizer
Made in Taiwan
EQ-815
INTRODUCTION
We congratulate you on choosing a Sound Product equalizer. You will find that it has been designed for easy use. The
latest advances in audio technology have been utilized in the design of making thisequalizer the ideal brain of any
audio system. We have incorporated many features to help you, 15x2 band of tone effects controls, in/out passing
switch, low-cut switch control and level control. Whether you're looking to custom tailor that mix or optimize the
acoustics of a really tough room. Please read all instructions carefully before operating.
WARNINGS
1. All operating instructions should be read before using this equipment.
2. To prevent the risk of electrical shock, do not remove cover or back, no user-serviceable parts inside,refer servicing
to a qualified service technician.
3. Do not expose to direct sunlight or heat source, such as radiators, stoves, or other appliances that produce heat.
4. This unit should be cleaned only with a damp cloth, audio solvents or other cleaning detergents.
5. When moving this equipment it should be placed in its original carton and packing. This will reduce the risk of
damage in transit.
INSTRUCTIONS FOR CONNECTIONS
1. Be sure that the power (1) is in the off position. All connections must be made with the equipment off.
2. Before plugging in the power cord (8) make sure the voltage selector switch (7) is set to the correct voltage.
(The unit is preset to 110 volts). Insert the power cord into the proper source.
3. For best sound use only high quality audio cables when hooking up this equalizer. Make sure that all cables are
pushed in securely.
4. Make sure you correctly attach the patch cables for the input source and output signal.
OPERATING INSTRUCTIONS
1. Power On: Once you have made all connections to your equalizer, Press the Power (1) button. The equalizer is on.
Press again to turn the power off.
2. IN/OUT Passing Switch (2): Press this switch in, the equalizer will be activated. Press it again to out, the signal will
be passed.
3. Graphic Equalizer (3): These sliders allow adjustment up to 12dB each octaves 25Hz to 16KHz (Dual 15 Band).
These equalizer controls are provided for improving frequency response of your system, compensating for room
environment effect.
4. Level adjustment control (6): You can obtain a proper output signal level using this level control.
The Level Display LEDS (4): will indicate you the exact output levels from -10dB to +18dB in 4 steps. When the
+18dB LED lights up, it tell you that there is too much outputpower calibrated to produced distortion, lower the level
control gradually until this LED goes off.
5. Low Cut Switch (5): The low-cut switch attenuates the muddy and unwanted sound created by your source
equipment, especially from record players.
25
25
40
40
63
63
100
100
160
160
250
250
400
400
630
630
1K
1K
1.6K
1.6K
2.5K
2.5K
4K
4K
6.3K
6.3K
10K
10K
16K
16K
dB
dB
0
0
+3
+3
+6
+6
+12
+12
-3
-3
-6
-6
-12
-12
LOW
CUT
LOW
CUT
IN /
OUT
IN /
OUT
+18
+18
+10
+10
0
0
-10
-10
0
0
+3
+3
+6
+6
+12
+12
-3
-3
-6
-6
-12
-12
OUT LEVEL
OUT LEVEL
CHANNEL
1
CHANNEL
2
POWER
ON
OFF
EQ-815
UNiK A
PROFESSIONAL AUDIO
INPUT
GAIN
INPUT
GAIN
