7.11 Simulation tab
Figure 7.48: Contour plot of 336 readings
7.10.3 Minimum .dat requirements
The Contour plot reads records from a .dat file created by retrieving data from the SQM-LU-DL-V. You can use other
methods to generate the Altitude and Azimuth field and make up a .dat file yourself. The minimum requirements for the
.dat file to be read by the contour plotting function are:
•
One comment line describing the field of UTC Date & Time, Altitude, Azimuth.
•
One line defining the ending of the header.
•
Following lines of data
Here is an example:
# UTC Date & Time, MSAS, Altitude, Azimuth
# END OF HEADER
2018-05-15T06:05:24.057;21.85;0;0
2018-05-15T06:05:34.040;21.86;20;0
7.11 Simulation tab
The “Simulation” tab is enabled from the View menu.
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013
57
Summary of Contents for SQM-LU-DL-V
Page 2: ......
Page 104: ...14 Glossary 104 Unihedron SQM LU DL V Operator s Manual 20211013...
