Unigraf DisplayPort DPA-400, User Manual

Page: 32 / 34

Appendix B: I/O Connector
32
APPENDIX B: I/O CONNECTOR
You can use three external trigger signals to start or stop the data acquisition. The trigger
signals are available on the SubD-9 socket connector of the DPA-400. Please refer to the
Start triggers and Stop triggers dialogs to control the triggers functionality.
The HPD_IO signal is also available on this connector to provide you an easy measurement
access to the HPD signal driven by your DisplayPort™ sink and connected to your
DisplayPort™ source device.
Pin Signal Name Direction
1 IN0 Input
2 IN1 Input
3 IN2 Input
4 HPD_IO Output
5 OUT0 Output
6 OUT1 Output
7 OUT2 Output
8 OUT3 Output
9 GND -
IN0 : external input trigger 0.
IN1 : external input trigger 1.
IN2 : external input trigger 2.
HPD_IO : HPD signal common to the DisplayPort sink and source devices.
OUT0
–
OUT3 : for future expansions.
GND : electrical reference ground.