SETUP INSTRUCTIONS
11
Adding the License Key
You will need a hardware specific license key for using Unigraf DPA-400 GUI. Each license is
valid for one specific device only. By using the GUI you can read the
Seed Number
of your
DPA-400 unit. For a given Seed Number, Unigraf will provide you a
License Key
that will
enable you to use the GUI from any PC to control your DPA-400 GUI, the user can select the
interpreted DPCD registers based on the DP version.
You can usually find your DPA-400 License Key on a sticker glued on its enclosure, in the
delivery package or among its related documents. If you cannot locate the License Key, please
email to Unigraf the
Seed Number
shown on the dialog in order to receive your License Key.
Insert each of the 32 character long License Key in the field provided and click the Continue.
The license key is now saved in your PC and you can constantly use the device from this PC.
Please Click Close to return to the main window.
Upgrading the License
For upgrading your license please select
Decoding > Enter new license
. In the license entry
dialog, please type in or copy and paste the new license and click
Continue
.
