6
Safety and Regulatory Instructions
Safety and Regulatory Instructions
Read this chapter before using the WLAN Handset.
For safe and efficient operation of the handset, observe the guidelines given in this manual and all
necessary safety precautions when using the handset. Follow the operating instructions and ad-
here to all warnings and safety precautions located on the product, the Quick Reference Guide
and the User Manual.
Do not disassemble the handset. Disassembling the handset voids the warranty. The handset con-
sists of no consumer serviceable components. Service should be performed by Authorized Ser-
vice Center only.
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This product shall only be used with the following batteries:
• Permitted rechargeable batteries: OpenStage WL3 Lithium-Ion 930 mAh Order number:
S30122-X8008-X38
Single chargers shall only be connected with power adapters supplied by the manufacturer.
Available power adapters (Suppliers Designation) are:
• OpenStage WL3 desktop charging unit and power supply unit: European Union, Order number:
S30122-X8008-X24
• OpenStage WL3 desktop charging unit and power supply unit: UK, USA, CAN, AUS, Order
number: S30122-X8008-X26
• OpenStage WL3 desktop charging unit without power supply unit: Order number: S30122-
X8008-X27
The Charging Rack shall only be connected with the following power supply:
• 100–240 VAC/0.7A 50/60 Hz.
Precautions
•
Save this manual.
It includes important safety information and operating instructions. Save all
instructions for future reference.
• Avoid volume levels that may be harmful to your hearing. Exposure to excessive sound pres-
sure from a handset’s earpiece or headset may cause permanent hearing loss.
• The handset may retain small metal objects around the earpiece region.
• Connect AC (power supply) to the Desktop Charger only to designated power sources as
marked on the product.
Danger:
Never change the AC cord or plug. If the plug does not fit into the outlet, have a proper
outlet installed by a qualified electrician. Improper connection increases the risk of electric
shock.
• Position the electrical cord to the AC power supply where it is least likely to be subjected to
damage or stress.
• Remove the electrical cord from an outlet by pulling gently on the AC adapter, not by pulling
the cord.
• Unplug the Desktop Charger from a power source (or remove handset from charger) before
cleaning the handset to reduce risk of electric shock.
In Sweden, Norway and Finland a connection to protective earth (safety grounding) must be
provided.
In Sweden, Norway and Finland a connection to protective earth (safety grounding) must be
provided.
