Description
11
Description
WLAN Handset
Figure 2
The WLAN Handset.
1
Multifunction
1
/Alarm button
This button can be used as a short cut to functions. The button has two modes, long mode
or double press mode. In the WL3 Plus, the button is used as an alarm push button only.
See
"Define Multifunction Button" on page 47
and
"Push-button Alarm" on page 31.
2
Earpiece speaker
3
Volume button (up)
To increase the earpiece speaker, headset, and the loudspeaker volume.
4
Volume button (down)
To decrease the earpiece speaker, headset, and the loudspeaker volume.
5
Mute and PTT button
To turn on/off audible signals in standby mode, or silence the ring signal for an incoming
call. During a call, a long press on the button changes between microphone on/off. This but-
ton has the same function as (13) Sound off key.
To open the microphone during a Push-to-Talk (PTT) group call. The microphone is open
as long as the button is depressed.
6
Soft keys
The three Soft keys can be pre-programmed, see "Define Soft Keys" on page 45, or used
with the GUI. The function of each Soft key is indicated by text in the display just above the
keys.
7
Call key
To answer a call, to pre-dial a number, and used as a short cut to the Call list.
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
12