Unify OpenStage WL 3 User Manual Download Page 23

Page: 23 / 132

c03_WL3.fm

Description

WLAN Handset

A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual

3.1.0.1 Case

The plastic cover parts are made of durable PC/ABS material.

The WLAN Handset has the enclosure protection IP44, and fulfills IEC 60068-2-
32, procedure 1, which makes it drop proof from 1 meter onto concrete. Ascom
approves 12 drops from 1.5 meter.

3.1.0.2 Antenna

The antenna is integrated inside the handset.

3.1.0.3 Display

The display is an illuminated 28 x 35 mm, TFT display.

3.1.0.4 Keypad

While not in use, the keypad should be locked to prevent accidentally pressing a
key.

3.1.0.5 Loudspeaker

The handset has a separate loudspeaker for the loudspeaking function. It is
placed on the back side of the handset.

3.1.0.6 Microphone

The microphone is placed on the front bottom side of the handset.

IMPORTANT: The handset may retain small metal objects around the earpiece region.

Summary of Contents for OpenStage WL 3





































































































































Search results

Summary of Contents for OpenStage WL 3

Reviews:

Brands by name

Popular brands

Unify OpenStage WL 3, User Manual

Search results

Summary of Contents for OpenStage WL 3

Reviews:

Brands by name

Popular brands