Unify OpenStage WL 3 User Manual Download | Manualshive

Page: 108 / 132

background image

Advanced Messaging

c13_WL3.fm

Message Queuing and Message Priority

A31003-M2000-U107-1-7619, 1/2017

108

WL3 and WL3 Plus WLAN Handset, User Manual

When an acknowledged message has been replied to, the icon

is shown in

the message list. The text “Accepted” or “Rejected”, and time and date is also
added in the acknowledged message.

13.3 Message Queuing and Message Priority

To notify about new incoming messages, all incoming messages are placed in a
message queue. The sorting order for the message queue depends on the
system settings. By default, the messages are sorted according to the message
priority, and thereafter according to arrival time.

The messages in the message queue are automatically displayed for 20 seconds
until all messages are displayed. You can extend the time to display a message
by pressing any button. You can also close a message to immediately see the
next message in the message queue.

The messages that you do not close are placed last in the message queue and
remain in the message queue until you close them. They are shown as unread in
the message list and are not shown as read until you have closed them.

Refer to the Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN
Handset for information on how to configure the message queue.

13.4 Colored Messaging

You can receive colored messages in the handset. The application that sends the
message determines the color. Colored messaging can be useful for categorizing
messages. In the figure below, there are two colored messages (a new message,
and a read message) in the Message inbox (left in the figure). The messages are
indicated by a gradient, color bar behind the envelopes. In addition, a gradient
color bar is shown below the envelop when reading a colored message (right in
the figure).

Figure 8. Example of a colored message.

NOTE: The option “Delete” is not available for a message with request for answer. An
unacknowledged message can only be deleted from the message list.

Patient ready...

2011-05-17

Patient ready...
2011-05-17

Inbox

View

12:34

More

Back

Call

12:34

Help

Reject

2011-05-17 12:00

Patient ready for transport.
From: X-ray
To: B/12/3

«
...
106
107
108
109
110
...
»

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Related manuals for OpenStage WL 3

Brand: Samsung Pages: 4

Brand: Jabra Pages: 2

Brand: Razer Pages: 22

Brand: Jabra Pages: 18

Wireless Headset

Brand: Logitech Pages: 2

Brand: Valore Pages: 5

Brand: Sigtronics Pages: 2

Brand: Jabra Pages: 2

Brand: Jabra Pages: 2

Brand: Jabra Pages: 4

GN2000 OC Series

Brand: Jabra Pages: 2

Brand: Jabra Pages: 3

Brand: Jabra Pages: 14

Brand: Jabra Pages: 19

Brand: Jabra Pages: 1

Brand: Jabra Pages: 2

Brand: Jabra Pages: 27

Brand: Jabra Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands