SHB_PNG-Konfig.fm
A31003-M2000-M103-2-76A9, 07/2014
Alarm and Emergency Call Configuration, Administrator Documentation
3-12
Configuration and activation
Configuration menu
1.
Select the
Additional Features
icon in the main menu.
2.
Select
Configuration
.
3.
Enter the five-position service PIN and confirm with
OK
.
4.
Select one of the three operating modes.
5.
Select
Alarms
.
6.
Select
Alarm Signal
.
7.
Select
Prealarm
or
Alarming Signal
.
8.
Change the values of the following parameters:
Table 3-9
Parameter – Prealarm/Alarming Signal
Parameters
Operating Mode
Value Range
Standard Value
Warning Signal
BM/AM/PNG
On/off
On
Alarm Signal
BM/AM/PNG
Alarm 1 ... 5
Prealarm: Alarm 5
Alarming Signal: Alarm 1
Volume
BM/AM/PNG
1 ... 5
Prealarm: 3
Alarming Signal: 5
9.
Confirm with
Save
.
3.2.1.2
[Mode] Activation
Specify here how the selected operating mode (see Section 3.1.3, "Operating mode
(OpenStage M3 Plus and OpenStage M3 Ex Plus only)") is to be activated (applies for all
device types).
If only
Automatic
is activated, the selected operating mode is activated automatically when the
handset is removed from the charger and deactivated when the handset is replaced in the
charger. If
Manual
is deactivated, the selected operating mode cannot be activated or
deactivated manually. Both options can be activated.
Procedure:
1.
Select the
Additional Features
icon in the main menu.
2.
Select
Configuration
.
3.
Enter the five-position service PIN and confirm with
OK
.
4.
Select one of the three operating modes.
5.
Select
[Mode] Activation
.