Enhanced phone functions
61
Transferring a call after a speaker call announcement
in a group
If this function has been configured (contact your service personnel), you can
use a speaker call (announcement,
page 113) to announce a call in progress
to a group of users
After a member of the group has accepted the call request, you can transfer the
waiting party.
Prerequisite:
You are conducting a call.
Confirm. The other party is placed on hold.
v
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter the group’s station number.
[
Announce the call.
When a member of the group accepts the call
page 46, you are connected to
this party.
\
Replace the handset.
or
Select and confirm the option shown
1
.
Sending a trunk flash
To activate ISDN-type services and features through the network carrier’s ana-
log trunks or those of other communications platforms (such as "consultation
hold"), you must send a signal to the trunks before dialing the service code or
telephone number.
Prerequisite:
You have set up an external connection.
v
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown
2
.
j
Enter the service code and/or telephone number.
Consultation
Calls
g
Speaker call
Transfer
1. ”Differing display view in a HiPath 4000 environment”
If the connection between the two other parties is not established within 45
seconds, the call from the first party returns to you (recall).
Calls
g
Trunk flash
