Unify OpenStage 60 T User Manual Download Page 59

Page: 59 / 155

Enhanced phone functions

Conducting a conference

In a conference call, you can talk to as many as four other parties at the same
time. These may be internal or external users.

[

You are conducting a call.

if nec.

Open the context menu



page 28.

Select and confirm the option shown.

Call a third party.

if nec.

If the third party does not answer:

Confirm.

Inform this party that you are initiating a conference.

Select and confirm the option shown.

A tone sounds every 30 seconds to indicate that a conference is in progress.

Adding up to five parties to a conference

if nec.

Open the context menu



page 28.

Confirm.

Call the new party.w

Select and confirm the option shown.

Removing parties from the conference

Select a station.

Open the context menu



page 28.

Select and confirm the option shown.

Ending a conference

Open the context menu



page 28.

Select and confirm the option shown.

Replace the handset, if this feature is configured (contact your service person-
nel).

Removing party from the conference

Select a station.

Open the context menu



page 28.

Select and confirm the option shown.

You can only add parties to or remove them from a conference if you initi-
ated the conference.

Start conference

Return to held call

Conference

Add party

Conference

Remove party

If a participant that was connected to the conference via an unencrypted
line leaves, the conference remains unsecured.

End conference

Drop last conf. party

Summary of Contents for OpenStage 60 T




























































































































































Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands

Unify OpenStage 60 T, User Manual

Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands