manualshive.com logo in svg

Unify OpenStage 60/60 G, User Manual

Share
Download
Unify OpenStage 60/60 G User Manual Download Page 28

28

Getting to know the OpenStage

Telephony dialogs

The dialogs in the lower area of the display prompt you to input data or provide you with 
information about the call states. 

Example: You dialed the phone number of a contact saved in the phonebook.

The pop-up menu 

Æ

 Page 29 provides functions suited to the situation, which you can select and 

confirm using the TouchGuide

Æ

 Page 20.

Messages

The messages displayed in the upper left area of the display advise you of current settings or 
events.

Example:
• Call forwarding is activated for all calls. All calls are forwarded to the party named "Coco 

Chanel"

1

. 

• You received a message while you were absent.
• A call list contains a new entry

Explanation of all message icons:

1.

The display depends on whether you defined a party from the personal phonebook or the system phonebook as the forwarding 
destination.

Icon

Meaning

You have received one or more new messages.

One or more new entries have been added to the call lists.

Call forwarding is active.

Callback
Send message

Coco, Chanel

Information on the connection status and caller

Situation-specific functions

220870

Messages received

Activated call forwarding

Call list entry

Summary of Contents for OpenStage 60/60 G



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands