Unify OpenStage 60/60 G User Manual Download

Page: 168 / 186

168

Differing display views in a HiPath 4000 environment

Checking backups

Check which backups are stored on the USB Memory Stick.

Prerequisite:

You have selected a backup and opened the context menu

Page 166.

Select and confirm the option shown in the context menu.

The available information is indicated in a pop-up message.

Deleting backups

You can delete invalid or old backups on your USB Memory Stick.

Prerequisite:

You have selected a backup and opened the context menu

Page 166.

Select and confirm the option shown in the context menu.

A security prompt is displayed.

Confirm the option shown.

Deletion of backups is the responsibility of the user and is therefore not
password-protected.

Differing display views in a HiPath
4000 environment

Depending on the system configuration, some functions may not always be offered in the
display as described in this document.

In addition, display texts may differ from those described in this document
depending on the system configuration.

The following table provides an overview:

Full ID

Delete

HiPath 3000-

HiPath Open Office

OpenScape Business

display

HiPath 4000 display

Description

In/Out of hunt group

All hunt groups on/off

Page 124

Call waiting trm.

Second call release?

Page 62

Call wait.trm. on/off

Second call on/off?

Page 62

Join/leave group

Hunt group on/off?

Page 124

Use speed dialing

Use speed dialing?

Page 57

Change speed dial

Speed dial?

Page 57

Transfer trunk

Transfer trunk?

View callbacks

Show callback destinations?

Page 49

Ringer cutoff on/off

Ringer cutoff on/off?

Page 97

Transfer

Transfer?

Page 48

Page 67

Summary of Contents for OpenStage 60/60 G



























































































































































































Search results

Summary of Contents for OpenStage 60/60 G

Reviews:

Related manuals for OpenStage 60/60 G

Brands by name

Popular brands

Unify OpenStage 60/60 G, User Manual

Search results

Summary of Contents for OpenStage 60/60 G

Reviews:

Related manuals for OpenStage 60/60 G

Brands by name

Popular brands