Unify OpenStage 40 User Manual Download

Page: 55 / 124

Enhanced phone functions

During a call

Using call waiting (second call)

Callers can still reach you while you are engaged in another call. A signal alerts
you to the waiting call.



You can ignore or accept the second call.



When you accept the waiting call, you can either end the first call or place it on
hold and resume the call later on.



You can block the second call or the signal tone (



Page 56).

Prerequisite:

You are engaged in a phone call and hear a tone (every six sec-

onds). When the function "Call pop up" is activated, a notification window ap-
pears



Page 29.

Ending the first call and answering the waiting call:

Replace the handset. Your telephone rings.

Answer the second call. Lift the handset.

Placing the first call on hold and answering the second call:

Select and confirm the option shown.

You are immediately connected to the second caller. The first party is placed on
hold.

Ending the second call and resuming the first one:

Confirm.

Replace the handset. "Recall" appears on the display.

Lift the handset.

You are reconnected with the first party.

Call waiting

Quit and return

Summary of Contents for OpenStage 40





























































































































Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands

Unify OpenStage 40, User Manual

Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands