manualshive.com logo in svg

Unify OpenStage 40 T, User Manual, Page: 77 / 110

Share
Download
Unify OpenStage 40 T User Manual Download Page 77

Privacy/security

77

Activating/deactivating "Do not disturb"

If you do not wish to take calls, you can activate do not disturb. Internal callers 
hear the ring tone and receive the message "Do not disturb". 

External callers are redirected to the attendant console. The administrator can 
set forwarding destinations for do not disturb so that internal and external calls 
can be forwarded.

Prerequisite:

 The administrator have activated do not disturb for all 

HiPath 4000 stations in your system.

N

Open the Program/Service menu 

 page 26.

Select and confirm the option shown.

Select and confirm the option shown. The display shows whether do not disturb 
is activated or deactivated 

 page 20.

Confirm the option shown.

or

confirm.

Activating/deactivating "Speaker call 
protect"

You can block speaker calls to your phone. If a caller attempts to contact you via 
a speaker call, the connection is established as a normal call.

N

Open the Program/Service menu 

 page 26.

Select and confirm the option shown.

Select and confirm the option shown.

The display shows whether "Speaker call protect" is activated or deactivated.

Confirm the option shown.

or

confirm.

If your phone belongs to an ONS group (parallel call 

 page 104), please 

note the following:

Do not disturb can be activated/deactivated on any phone in the ONS 
group - it then applies to all phones in that group. 

Feature settings? 

g

Do not disturb?

Activate?

Deactivate?

An icon in the status bar 

 page 20 reminds you that "Do not disturb" is 

activated.

The attendant can bypass "Do not disturb" and reach you.

If the administrator have blocked "Do not disturb" generally for 
HiPath 4000, the menu option "Do not disturb?" does not appear in the 
Program/Service menu.

Feature settings? 

g

Speaker call protect?

Activate?

Deactivate?

Summary of Contents for OpenStage 40 T















































































































Reviews:

No comments