Privacy/security
93
Privacy/security
Activating and deactivating the ringer
Activating and deactivating the ringer permanently or
setting to beep
If you do not want to be disturbed by the phone ringing for an incoming call, you
can deactivate the ringer permanently or set it so that you are only advised of a
call by a beep every 25 seconds. You can also configure the settings while the
phone is ringing.
)
Hold down the key (approx. 2 seconds) until the "Ringer off" icon appears on the
status bar on the display (
Page 19).
The ringtone is deactivated.
)
To switch the function off again, hold down the key until the "Ringer off" icon
disappears from the status bar on the display.
You can also switch the function on and off using the option in the idle menu.
Select and confirm the option shown.
Setting the ringer to a beep
)
Hold down the key (approx. 3 seconds) until the "Beep" icon appears on
the status bar on the display (
Page 19). You will hear a short beep every
25 seconds for as long as the caller stays on the line.
)
To switch the function off again, hold down the key until the "Beep" icon
disappears from the status bar on the display.
Deactivating the ringer temporarily for incoming calls
and reactivating it
If you are disturbed on an important call by the phone ringing, for example, you
can deactivate the ringer temporarily and then activate it again.
)
Press the key briefly. The ringer is deactivated.
)
Now press the key again briefly. The ringer is reactivated.
Rufton aus?
