104
OpenScape Voice functions
OpenScape Voice functions
The OpenScape Voice supports a number of functions that you can activate and
deactivate from your phone.
Making anonymous calls
Your administrator decides whether or not your caller ID (name and phone num-
ber) is displayed on a called party’s station.
Anonymous
calling is when your
data is not transmitted. The settings configured can be deactivated, however, for
specific calls.
Deactivating
If your administrator permanently activated
anonymous calling
for your phone,
you can deactivate this setting as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Page 118) to transmit the caller infor-
mation.
Z
You hear a confirmation tone or an announcement.
Activating
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Page 118) to suppress the caller ID.
Z
Wait until you hear the confirmation tone or announcement. Caller ID transfer is
suppressed. "Private/Anonymous" appears on the called party’s display instead
of the caller ID.
Temporarily activating anonymous calling for the next
call
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting for the next call as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Page 118).
Z
Wait until you hear the confirmation tone or announcement.
j
Dial the phone number of the party you want to contact. Caller ID transmission
is reactivated after this call.
• If your caller ID is transmitted: your caller ID is displayed.
• If your caller ID is suppressed: "unknown" is displayed.
